NetApp NearStore R100 Hardware And Service Manual page 38

Connecting a disk
shelf to the chassis
28
To connect a disk shelf to the chassis, complete the following steps.
Step Action
1 Put on the antistatic wrist strap and grounding leash.
2 Make sure that the chassis and the disk shelves are turned off.
3 Connect each disk shelf to the chassis using the supplied SCSI cables
(SCSI LVD VHDCI-68P), as shown in the following illustration.
10/100
BASE-T
PS1
To network
Third-party
backup devices
CAUTION
PROPERLY SHUT DOWN SYSTEM BEFORE OPENING CHASSIS.
OPENING WITH POWER ON WILL CAUSE IMPROPER SHUTDOWN.
TX TX
RX RX
LINK LINK
SWITCH P/S OFF PRIOR
TO REMOVAL/INSERTION
FAN 1 FAN 2
EMU
EXT 1 EXT 2 AUX LCD
FAN 1 FAN 2
Disk shelf cables
Disk shelf cables
Console
Diagnostic
SWITCH P/S OFF PRIOR
TO REMOVAL/INSERTION
PS2
FAN 3
94-264VAC, 8A MAX 94-264VAC, 8A MAX
50-80HZ 50-80HZ
FAN 3
Connecting an R100 disk shelf
Chassis
power
cords
Disk
shelf
power
cords