Table of Contents
Advertisement
Chapter 8: Replacing External Chassis Components
Step
Action
2
Tighten and then torque the chassis fan thumbscrews 8 to 10 in.-lbs.
3
Align the pins on the bezel with the holes on the front panel of the
chassis, and then push the bezel straight onto the front panel.
4
Reconnect and turn on the power to the chassis.
5
Interrupt the boot process by pressing the Delete key during the
memory test.
6
Run diagnostics by entering the following command at the ok>
prompt:
sys-diag
See the Diagnostics Guide for more information.
7
Run the diagnostics that apply to the unit you installed or replaced.
115
Advertisement
Table of Contents
