NetApp NearStore R100 Hardware And Service Manual page 32

Moving the
installation
brackets
22
WARNING WARNING
To avoid injuring yourself or damaging the chassis, you must work with at
least one other person when you install the chassis in the rack.
If you want to mid-install the chassis in a rack, you must move the installation
brackets on the sides of the chassis from the default position.
To move the installation brackets, complete the following steps.
Step Action
1 Put on an antistatic wrist strap and attach the grounding leash so that
you are appropriately grounded.
Chassis mid-installed
in a rack
Installing an R100 chassis