NetApp NearStore R100 Hardware And Service Manual page 112

Removing the
NVRAM III DIMM
Installing the
NVRAM III DIMM
102
To remove the NVRAM III DIMM, complete the following steps.
Note
This procedure assumes that you already removed the NVRAM III adapter, as
described in "Removing an existing expansion
Step Action
1 Push apart the latches on both sides of the DIMM with your index
fingers.
Locator notch
2 Place the DIMM in an antistatic bag.
To install the NVRAM III DIMM, complete the following steps.
Step Action
1 Hold the DIMM at the top corners to avoid damaging the
components or the edge connector.
adapter" on page 99.
NVRAM card,
top edge
Installing or replacing expansion adapters