Table of Contents
Advertisement
Boot error message
File system may be
scrambled
Invalid PCI card slot
%d
Configuration
exceeds max PCI
space
Chapter 9: Troubleshooting LCD Messages
Explanation
One of the following errors
causes the file system to be
inconsistent:
An unclean shutdown when
the chassis is in degraded
mode and when NVRAM is
not working.
The number of disks
detected in the disk array is
different than the number of
disks recorded in the disk
labels. The system cannot
start when more than one
disk is missing.
The system encounters a
read error while
reconstructing parity.
A disk failed at the same
time the system crashed.
%d—The expansion slot
number. The system detects a
adapter that is not supported by
Network Appliance.
The memory space for mapping
PCI adapters has been
exhausted, because either
There are too many PCI
adapters in the system
An adapter is demanding
too many resources
Fatal?
Corrective action
Yes
Contact Network Appliance
Technical Support to learn how to
start the system from a system
boot diskette and repair the file
system.
Yes
Make sure that all disks on the
system are properly installed in
the disk shelves.
Yes
Contact Network Appliance
Technical Support for help.
Yes
Contact Network Appliance
Technical Support to learn how to
repair the file system.
Yes
Replace the unsupported adapter
with an adapter that is included in
the System Configuration Guide
at http://now.netapp.com.
Yes
Verify that all expansion adapters
in the chassis are supported.
Contact Network Appliance
Technical Support for help. Have
a list ready of all expansion
adapters installed in the chassis.
139
Advertisement
Table of Contents
