Table of Contents
Advertisement
Boot error message
Drive %s.%d not
supported
FC-AL loop down,
adapter %d
138
Explanation
%s—The adapter slot number;
%d—The disk ID number. The
system detects an unsupported
disk drive.
The system cannot detect the
FC-AL loop or adapter.
Fatal?
Corrective action
Yes
1. Remove the drive
immediately or the system
drops down to the PROM
monitor within 30 seconds.
2. Check the System
Configuration Guide at
http://now.netapp.com
verify support for your disk
drive.
Yes
1. Identify the adapter by
entering the following
command:
storage show adapter
2. Turn off the power on the
chassis and verify that the
adapter is properly seated in
the expansion slot.
3. Verify that all Fibre Channel
cables are connected.
to
Boot error messages
Advertisement
Table of Contents
