Table of Contents
Advertisement
100Base-TX/
1000Base-T NIC
LEDs
Chapter 5: Startup Responses on an R100 System
Location of LEDs: The 100Base-TX/1000Base-T NIC has one port and four
LEDs, as shown in the following illustration.
Description of LEDs: The following table describes the LEDs on the
100Base-TX/1000Base-T NIC.
LEDs
State
Top (not
N/A
labeled)
LNK
On
Off
ACT
On
Off
Bottom (not
Amber
labeled)
Green
DATA
LNK
ACT
10/100/1000
TX
100Base-TX/
1000Base-T NIC
Indicates...
Not used.
Valid network connection. For some devices,
the LED can take several seconds to light up.
Link to network is not present.
Sending or receiving data.
Idle.
Operating at 1000 Mbps.
Operating at 100 Mbps.
59
Advertisement
Table of Contents
