Table of Contents
Advertisement
Installing a chassis
fan subassembly
114
Step
Action
2
Pull the bezel straight off the front panel of the chassis by using the
grooves on the left and right edges of the bezel.
3
Loosen the thumbscrews on the chassis fan subassembly that failed.
Note
The thumbscrews are torqued at the factory. You need to use a #2
Phillips screwdriver to loosen the thumbscrews.
4
Using the handle, pull the chassis fan subassembly straight out of the
chassis frame.
Note
The chassis reports a failure for the removed fan assembly.
5
Set the chassis fan subassembly aside.
To install a chassis fan subassembly, complete the following steps.
Step
Action
1
Using the handle, slide the chassis fan subassembly straight into the
open slot on the chassis.
FANS 1-2
FANS 3-4
FANS 5-6
NetApp R100
activity
status
power
Replacing the chassis fan subassembly
Advertisement
Table of Contents
