Table of Contents
Advertisement
24
Step
Action
4
Insert the mounting screws in the bottom hole on each side first and
tighten the screws using a #2 Phillips screwdriver.
Note
The rack can support the weight of the chassis after the chassis is
attached by the bottom screws. You do not need another person to
hold the chassis from the back of the rack after fastening these
screws.
5
Insert and tighten the remaining screws.
6
For disk shelf installation, see
two-post mounting
For disk shelf connection to your R100 chassis, see
R100
System" on page 25.
"Installing an R100 disk shelf using
brackets" on page 15.
"Connecting an
Installing an R100 chassis
Advertisement
Table of Contents
