Table of Contents
Advertisement
5.
Quick Installation
This Quick Installation helps you to install the product quickly and easily. For detailed
instructions on installation, and further setup options, please refer to the configuration
chapter.
5.1 Accessing the X16
Connecting with WAN port：
◼ Connect an Ethernet network cable to the X16
connect the other end of the network cable to a router or data switch that is
the same router/data switch where your PC's Ethernet port is connected
◼ Find the IP Address of the X16
[fx] 6 + 6. It will show the WAN IP address.
◼ Input the IP address that you found with the port number 8800 (E.g.
http://192.168.123.1:8800)
◼ You will be presented with the login screen.
◼ Notes:
⚫
The default WAN port type is DHCP. It will be 0.0.0.0 if there is no DHCP
server.
⚫
On the XD10, press [fx] # + 0 + 9999 to enter System Settings, set the
WAN IP type and IP address in the third IP address, and save the
settings to take effect. You can log in via the web http://IP:8800/.
Connecting with LAN port：
◼ The default LAN IP is 192.168.123.1，
◼ When your PC is connected to the X16
enter http://192.168.123.1:8800/ in your browsers URL field (address bar) to
access the Web-based Admin.
Log in in the web：
◼ The default admin account is "admin", password is "XB-X16+". (Previously
1234)
◼ Please be sure to change the default password to use a combination of digits,
letters, and special symbols 8 or above.
X16plus Administration Manual
plus
Web-based Admin
plus
in your browsers URL field (address bar).
Page 36 of 54
's W (WAN) port. Then
plus
on your network at the XD10 by pressing
plus
LAN network segment you can
Rev. 1.1.4
Hide quick links:
Advertisement
Table of Contents
