Transfer And Answer Calls - Xblue Networks Xplus100 User Manual

Telephone Operation
2. Enter the number to be dialed, including a flash (Feature 3) if need, or pauses (Feature
70. Press next
3. Select the line group to be accessed when the speed bin is dialed. The line group is only
used when a speed bin is accessed through the navigation keys. At default all CO Lines are
in line group 1.
Placing a Call:
1. To dial a stored speed dial number press the desired CO Line and then press Feature 1,
please the speed dial bin to be dialed (500 - 549). Or using the navigation keys, from an
idle telephone press up to access the highest speed bin (549) or down to access the lowest
(500).
2. The speaker button's LED will immediately light, and the speakerphone is active.
speaker button
3. Press
Transfer and Answer Calls
Feature Code: Feature
68
Description
Transfer and Answer Call is a convenience feature that speeds the process of transferring and
answering a ringing call, by making the operation possible by one button. (This feature must be
used from a feature (Flexible) button that has been designated for the purpose.)
When a busy extension user is in the process of transferring a call and another call rings in, the
Transfer/Answer button can be pressed to complete the transfer and answer the ringing call at the
same time.
Default Settings:
N/A
Operation
Setup:
Program an available Feature/DSS Button for the Transfer and Answer code operation.
1. While on a CO Line call and another call is ringing, initiate the transfer process.
a. Press the Transfer button.
b. Dial the destination intercom extension number.
Or...
c. Press the Feature/DSS button of the destination extension number.
106
to hang up the call.
XBLUE Networks