Copy with a separation sheet - Copy with the separation sheet
Before you begin
Make sure the settings in Océ Express WebTools are correct.
Procedure
1.
Feed the original in the scanner.
2.
Specify the copy job and the preferred settings.
3.
Press the green Start key to start the copy job.
The job will be printed with the preferred separation sheet.
NOTE
When a scan-to-file job is made with a check plot, a separation sheet will not be generated.
Copy with a separation sheet - Copy with the separation sheet
Chapter 5 - Use the Océ TC4 scanner for copy and scan-to-file jobs
199