Original Type - Oce PlotWave 750 Operation Manual

Original type

Introduction
The Océ TDS600 scanner allows you to adjust the exposure setting according to the type of
image on the original. There are six original types available. Select a mode suitable for the
original.
Procedure
1.
Press the 'Original type' function key to select the appropriate image type:
• By default 'Lines/text' is selected with 'Background compensation' enabled. This is the most
suitable setting for originals that contain characters and line art.
• Press the 'Original type' function key to select 'Photo' when the original consists of a
combination of characters, line art and picture images.
NOTE
If you select 'Photo' or 'Grays&lines', 'Background compensation' will be turned off
automatically by default.
• Press the 'Original type' function key to select 'Grays & lines' if the original contains many
grayscales and lines.
• Press the 'Original type' function key to select 'Blueprint' if you want to copy an original with a
'negative' image (image in white on dark background). The copy will be positive (image in
black on white background).
• Press the 'Original type' function key to select 'Printed matter' when you want to copy an
original that is already a print itself, containing raster information.
• Press the 'Original type' function key to select 'Dark orig' when the original has an extremely
dark background (i.e. low contrast).
• Press the 'Original type' function key to select 'Cut & paste' when the original contains paste
edges.
2.
Make other settings as required.
3.
Feed the original.
Chapter 6 - Use the Océ TDS600 scanner for copy and scan-to-file jobs
Original type
271