Oce PlotWave 750 Operation Manual page 134

Define the template preferences for the Océ TDS600 scanner
The grouping reflects a combination of settings on the scanner operator panel. Template 1
functional settings are given as an example. You can find detailed information about the settings
in the tooltip.
Settings group
[Template 1: General]
[Template 1: Custom
setting 1]
[Template 1: Custom
setting 2]
[Template 1: Custom
setting 3]
[Template 1: Custom
setting 4]
[Template 1: Custom
setting 5]
[Template 1: Original -
Feeding]
[Template 1: Original -
Sheet]
[Template 1: Original -
Image]
[Template 1: Print and
File - Image]
[Template 1: Print -
Sheet]
[Template 1: Print -
Finishing]
[Template 1: Print -
Layout]
[Template 1: Print -
Stamping]
[Template 1: File]
2.
Click [Edit] in the settings group bar or click the value of a single setting.
3.
Click [Ok] to confirm your entries or [Cancel] to reject your entries.
134 Chapter 3 - Define your workflow with Océ Express WebTools
Contains settings that define
The general template information.
Examples: [Name], [Description], [Number of copies], [Print (copy)],
[File (scan-to-file)] and media selection.
A setting on the custom card. The custom card provides quick access to
frequently used settings.
Example: [Media] with the media information of each roll and manual
feed.
The original feeding options.
Examples: [Input mode], [Legend location] and [Drawing method].
The original sheet options.
Examples: [Paper series], [Remove leading strip], [Remove trailing
strip], [Scan width: method], [Scan width: custom], [Scan length: meth-
od] and [Scan length: custom].
The original image options:
Examples: [Original type], [Background compensation] and [Lighter/
darker].
Print and file image options.
Examples: [Zoom: method], [Zoom: custom], 'Scale table settings' and
[Mirror].
The sheet options for the print.
Examples: [Cut method] and [Custom cut length].
The finishing options for the print.
Examples: [Folding], [Folded copy delivery], [Folded package: length],
[Folded package: width], [Bind], [Binding edge], [Reinforce] and
[Punch].
The layout options of the print.
Examples: [Horizontal alignment], [Vertical alignment], [Horizontal
shift], [Vertical shift], [Add leading strip] and[Add trailing strip].
The stamp options of the print.
Examples: [Stamp], [Stamp name], [Stamp size], [Stamp color] and
[Stamp position].
The file options for scan-to-file.
Examples: [Destination], [Resolution (dpi)], [File type], [Compression
for TIFF], [File organization for TIFF], [Compression for PDF], [Compres-
sion for PDF/A] and [Optimization].