Oce PlotWave 750 Operation Manual page 127

Refer to the
destination.
2- Define the settings for the Scan templates (1 to 5)
1. Click [Preferences]. Choose your template, for example [Scan template 3].
Template 1: File
In setting group
[Scan template 3: Template description]
[Scan template 3: Top 5]
[Scan template 3: File]
[Scan template 3: File type]
[Scan template 3: Resolution]
[Scan template 3: Original type]
[Scan template 3: Original width]
[Scan template 3: Remove strip]
[Scan template 3: Mirror]
[Scan template 3: Light dark]
Configure scan destinations on page 139
section for all details on how to set a scan
Action
Enter the name of the template that will be dis-
played on the scanner panel, and a descrip-
tion.
These destinations can be predefined under
the [Configuration] - [Scan destinations] tab.
For more information on how to do this, see
Configure scan destinations on page
Select the settings to put on the custom card.
The custom card provides quick access to fre-
quently used settings.
Examples: [Destination], [File type]...
Select the scan [Destination]: [The destination
to put the scans into.] You can choose be-
tween different scan destinations previously
configured (
page 139)
Define also the color of the scan.
Set the [File type] of the scanned file and con-
figure the associated specific options when
needed:
- [Compression for TIFF],[File organization for
TIFF] when the selected file type is TIFF
- [Compression for PDF/A][Compression for
PDF] when the file type is PDF or PDF/A
- [JPEG quality] when the file type is JPEG
Set [The resolution of the scanned image in
dpi.] You can choose between 72, 100, 150,
200, 300, 400 and 600 dpi.
Set the content type of the original file and the
[Background compensation].
That will influence the quality of the scan file.
The width of the original that the scanner
scans.
Set the method and the sizes.
You can remove a strip from one or several
sides of the image.
You can mirror the image on the file.
Set a positive value to increase the darkness.
Set a negative value to bring more light to the
scanned file.
Chapter 3 - Define your workflow with Océ Express WebTools
Define a scan-to-file template
Configure scan destinations on
139.
4
127