Define The Templates For Copy And Scan Jobs - Oce PlotWave 750 Operation Manual

Define the templates for copy and scan jobs.

Define the [Templates] for copy and scan to file with the Océ TDS600 scanner
The templates enable you to easily perform copy and scan jobs that you do very often. They
contain pre-defined settings for copy and/or scan-to-file jobs.
In the [Templates] tab for the Océ TDS600 scanner , you can define the preferred values for 4
scan/copy templates. These templates are then displayed on the scanner operator panel. It is then
very easy to select the template to use and press the green button, instead of having to define all
the settings manually.
The [Templates] - [Overview] tab displays the main features of the 4 templates, and the 10
available stamps for copy jobs.
NOTE
Before you can edit a setting or a settings group, you must log on as a key operator or power
user.
Define the template preferences for the Océ TDS600 scanner
Introduction
Here you can define the preferred values for 4 templates: Template 1, Template 2, Template 3 and
Template 4. The templates are applicable to the scanner operator panel. They contain predefined
settings for copy and/or scan-to-file jobs.
NOTE
Before you can edit a setting or a settings group, you must log on as a key operator or power
user.
Illustration
[26] Templates
Procedure
1.
Click [Preferences] - [Template 1] / [Template 2] / [Template 3] / [Template 4].
Define the templates for copy and scan jobs.
Chapter 3 - Define your workflow with Océ Express WebTools 133