Perform Basic Copy Jobs; Make Copies - Oce PlotWave 750 Operation Manual

Perform basic copy jobs

A number of basic tasks are performed in the Océ TDS600 scanner.
These include:

• Make copies

• Select the required media
• Select the input mode
• Specify the zoom factor
• Select the exposure
• Background compensation
• Deliver originals after scanning
• Define settings for the next original
• Account logging:
• Using the manual feed for copying
• Define delivery of copies
• Job interrupt
• Stop a job
• Copy stamping
Make copies
Procedure
1.
Place your original face-down, right aligned along the original guide. Keep the legend at your
right hand side.
NOTE
When you feed the original, keep it in place until it is transported (about 1 cm (0.4")) into the
machine.
[76] Insert the original
2. Select a specific template.
3.
Press the green Start key to start the copy or scan to file job.
Your original is fed into the scanner. The printer starts.
Make copies on page 231
Select the required media on page 233
Select the input mode on page 234
Select the zoom factor on page 235
Select the exposure on page 236
Background compensation on page 237
Deliver originals after scan jobs on page 239
Account Logic on page 241
Define the delivery of folded copies on page 242
Interrupt a job on page 243
Stop a job on page 244
Stamping on page 245
Chapter 6 - Use the Océ TDS600 scanner for copy and scan-to-file jobs
Define settings for the next original on page 238
Use the manual feed for copy jobs on page 240
Perform basic copy jobs
231