Configure The System For Copy And Scan With The Océ Tds600 Scanner; Set The Preferences For Copy And Scan-To-File - Oce PlotWave 750 Operation Manual

Configure the system for copy and scan with the Océ TDS600 scanner
Configure the system for copy and scan with the Océ TDS600
scanner

Set the preferences for copy and scan-to-file

Océ TDS600 scanner: Define the default output quality for copy and scan-to-
file jobs
Introduction
The Océ Express WebTools offers settings to optimize the default output quality for copy and
scan-to-file jobs made with the Océ TDS600 scanner. You can define a default output quality for
each template.
You can find these settings in the [Preferences] - [Template 1], [Template 2], [Template 3] or
[Template 4] tabs.
NOTE
Before you can edit a setting or a settings group, you must be logged on as a key operator or
power user.
[Original type]
The quality of the printed output is optimized based on the type of the original that is copied.
Setting location: 'Template 1, 2, 3 or 4: Original - Image'.
Values
[Line/text]
[Gray/lines]
[Photo]
[Dark original]
[Blueprint]
[Printed matter]
130 Chapter 3 - Define your workflow with Océ Express WebTools
Description
[Line/text] is the default value.
This value is advised for line drawings and design drawings.
Lines and text are optimized, a light background is compensated.
[Gray/lines] is the advised value for originals that contain many gray-
scales and lines.
[Photo] is recommended for low end display graphics originals (photo,
poster)
[Dark original] is the advised value for originals with a dark back-
ground.
The output is optimized especially for dark transparent originals. The
system compensates for the dark background and the actual informa-
tion on the original is optimized.
[Blueprint] is the advised value for blueprints.
The information on the original is inverted. White lines will be black,
the blue background will be white.
[Printed matter] is the advised value for an original that is already a
print itself, containing raster information.