Special Copy And Scan Jobs; Non-Standard Size Originals (Océ Tds600 Scanner) - Oce PlotWave 750 Operation Manual

Special copy and scan jobs

Special copy and scan jobs
On the TDS600 scanner you can carry out a number of special tasks in order to perform special
copy or scan jobs.
These include:
• Non-standard size originals
• The scan width
• The copy size
• Scanning originals with filing strip
filing strip along the left hand side on page 263
• Brightness
• Automatic background compensation
• Original type:
• Auto align
• Shift the image
• Mirror image
• Make a set copy
Non-standard size originals (Océ TDS600 scanner)
The Océ TDS600 scanner automatically detects the width of the inserted original. For DIN sizes,
for example, it detects whether the width is A0, A1, A2, A3, A4, 500 mm, or 700 mm.
The Océ TDS600 scanner system uses a memory table that contains all standard width - standard
length combinations to predict the length of the original. The scanner also measures the real
length of each original while it is transferred through the scanner.
NOTE
When you scan thick, thin or damaged originals or originals in a carrier sheet, use of output at
the rear side of the scanner is recommended to ensure correct delivery.
260 Chapter 6 - Use the Océ TDS600 scanner for copy and scan-to-file jobs
Non-standard size originals (Océ TDS600 scanner) on page 260
The scan width on page 261
The copy size on page 262
Brightness on page 269
Original type on page 271
Auto align on page 272
Shift the image on page 274
Mirror image on page 275
Make a set copy on page 276
Scanning originals with filing strip - Copying with removed
Automatic background compensation on page 270