Table of Contents
Advertisement
1. Make sure you've enabled port forwarding. (See
Forwarding.)
2. Click Advanced settings > Router > Port Forward.
3. To keep the application in the list (in case you want to re-enable port forwarding later
on), clear the Enable check box.
— or —
To remove the application from the list:
Click the row that you want to remove. A row of buttons (Delete, OK, Cancel)
appears.
Click Delete.
Port Trigger Panel: General
Some applications require multiple ports open for communication, many of which may be
initiated by a computer on the WAN. Examples of this include video conferencing, VoIP (Internet
telephony), and Internet gaming.
With port triggering, the device monitors outgoing data on specific port numbers (trigger ports).
The device keeps track of the IP address of the computer that sends data on these trigger ports,
so that when incoming data on the forward ports arrives, the device sends the incoming data to
the same computer.
Before you can use or configure port triggering, you must enable it, as explained in
Panel: Enabling Port
From the Port Trigger panel of the Router tab of the Advanced Settings window, you can:
● Enable port triggering for specified protocols and ports. (See
Enabling Port Triggering for Specified Protocols and
● Remove protocols and ports from the port triggering list. (See
Removing Ports From the Port Triggering
Port Trigger Panel: Enabling Port Triggering
Before you can use or configure Port Triggering, you must enable it.
1. Log in to the home page.
2. Click Advanced settings > Router > Basic.
3. Next to Port Triggering, select Enable.
Device Settings
Triggering.
Port Forward Panel: Enabling Port
Ports.)
List.)
101
Port Trigger
Port Trigger Panel:
Port Trigger Panel:
Advertisement
Table of Contents
