Table of Contents
Advertisement
Clear Spot 4G+ User Guide
100
3. To keep the application in the list (in case you want to re-enable port
forwarding later on), clear the
— or —
To remove the application from the list:
a. Click the row that you want to remove.
A row of buttons (
Delete
b. Click
.
Port Trigger Panel
Some applications require multiple ports open for communication, many of which
may be initiated by a computer on the WAN. Examples of this include video
conferencing, VoIP (Internet telephony), and Internet gaming.
With port triggering, the device monitors outgoing data on specific port numbers
(trigger ports).
The device keeps track of the IP address of the computer that sends data on
these trigger ports, so that when incoming data on the Forward ports arrives, the
device sends the incoming data to the same computer.
Before you can use or configure port triggering, you must enable it. See
Port Triggering" on page
Port Trigger
From the
panel of the
can:
•
Enable port triggering for specified protocols and ports. See
Triggering for Specified Protocols and Ports" on page
•
Remove protocols and ports from the port triggering list. See
Ports from the Port Triggering List" on page
Enabling Port Triggering
Before you can use or configure Port Triggering, you must enable it.
1. Log in to the home page.
Advanced settings
2. Click
Router > Basic
3. Click
.
Port Triggering
4. Next to
Enabling Port Triggering for Specified Protocols and Ports
1. Ensure you've enabled port triggering. See
page
100.
2. Display the "Port trigger" window.
a. Log in to the home page.
Advanced settings
b. Click
Router > Port Trigger
c. Click
Enable
check box.
Delete
OK
Cancel
,
,
) appears.
100.
Router
tab of the
101.
(
).
Enable
, select
.
"Enabling Port Triggering" on
(
).
.
"Enabling
Advanced Settings
window, you
"Enabling Port
100.
"Removing
2131352
Advertisement
Table of Contents
