Configuring The Router Tab; Basic Panel - Sierra Wireless Overdrive Pro User Manual

Section 5J

Configuring the Router Tab

Basic Panel (page 100)
LAN Panel (page 101)
Port Forward Panel (page 105)
Port Trigger Panel (page 107)
DMZ Panel (page 108)
Resetting the Software to Default Settings (page 109)
1.
Log in to the home page.
2.
Click
Advanced settings
3.
Click Router .
4.
Depending on the settings you want to configure, click one of the panels:
Basic . (See "Basic Panel" on page 100.)
. (See "LAN Panel" on page 101.)
LAN
Port Forward — Port forwarding lets you forward incoming traffic to specific ports and devices
(per their local IP address) on your network. (See "Port Forward Panel" on page 105.)
— You can set the device to monitor outgoing data on specific port numbers
Port Trigger
(trigger ports). (See "Port Trigger Panel" on page 107.)
— You can select one computer to receive all unsolicited incoming connections. (See
DMZ
"DMZ Panel" on page 108.)

Basic Panel

To access this panel:
1.
Log in to the home page.
2.
Click
Advanced settings
3.
Click Router > Basic
From this window, you can enable or disable these features, and perform these actions:
● USB Tethered Networking
micro-USB cable, set this field to
after they provide the correct Wi-Fi password (if Wi-Fi security is enabled).
This setting does not affect the ability to charge the Overdrive Pro 3G/4G Mobile Hotspot through
the micro-USB cable.
● Port Forwarding
— Port forwarding lets you forward incoming traffic to specific ports and devices
(per their local IP address) on your network. (See "Port Forward Panel" on page 105.)
100 Settings
( ).
( ).
.
— To prevent an unauthorized user from using the device through the
. Users will be able to connect only through Wi-Fi and only
Disable