Table of Contents
Advertisement
Section 5J
Configuring the Router Tab
Basic Panel (page 96)
LAN Panel (page 97)
Port Forward Panel (page 101)
Port Trigger Panel (page 103)
DMZ Panel (page 104)
Resetting the Software to Default Settings (page 105)
1.
Log in to the home page.
2.
Click
Advanced Settings
3.
Click
Router
.
4.
Depending on the settings you want to configure, click one of the panels:
Basic
. (See "Basic Panel" on page 96.)
. (See "LAN Panel" on page 97.)
LAN
Port Forward
— Port forwarding lets you forward incoming traffic to specific ports and devices
(per their local IP address) on your network. (See "Port Forward Panel" on page 101.)
— You can set the device to monitor outgoing data on specific port numbers
Port Trigger
(trigger ports). (See "Port Trigger Panel" on page 103.)
— You can select one computer to receive all unsolicited incoming connections. (See
DMZ
"DMZ Panel" on page 104.)
Basic Panel
To access this panel:
1.
Log in to the home page.
2.
Click
Advanced Settings
3.
Click
Router > Basic
From this window, you can enable or disable these features, and perform these actions:
● USB Tethered Networking
micro-USB cable, set this field to
after they provide the correct Wi-Fi password (if Wi-Fi security is enabled).
This setting does not affect the ability to charge the Overdrive Pro 3G/4G Mobile Hotspot through
the micro-USB cable.
● Port Forwarding
— Port forwarding lets you forward incoming traffic to specific ports and devices
(per their local IP address) on your network. (See "Port Forward Panel" on page 101.)
96
Settings
(
).
(
).
.
— To prevent an unauthorized user from using the device through the
. Users will be able to connect only through Wi-Fi and only
Disable
Advertisement
Table of Contents
