Table of Contents
Advertisement
Section 4J
Configuring the Router
Basic Section of the Router tab (page 104)
LAN Section of the Router Tab (page 105)
Port Forwarding Section of the Router Tab (page 109)
Port Triggering Section of the Router Tab (page 111)
DMZ Section of the Router Tab (page 112)
Resetting the Software to Default Settings (page 114)
1.
Log in to the home page.
2.
Click the
Advanced Settings
3.
Select
Router
.
4.
Depending on the settings you want to configure, select one of the tabs:
Basic
. See "Basic Section of the Router tab" on page 104.
. See "LAN Section of the Router Tab" on page 105.
LAN
Port Forward
. See "Port Forwarding Section of the Router Tab" on page 109.
. See "Port Triggering Section of the Router Tab" on page 111.
Port Trigger
DMZ
. See "DMZ Section of the Router Tab" on page 112.
Basic Section of the Router tab
To access this tab:
1.
Log in to the home page.
2.
Click the
Advanced Settings
3.
Select
Router > Basic
From this window, you can enable or disable these features, and perform these actions:
●
Port forwarding. See "Port Forwarding Section of the Router Tab" on page 109.
●
Port triggering. See "Port Triggering Section of the Router Tab" on page 111.
●
DMZ. See "DMZ Section of the Router Tab" on page 112.
●
Universal Plug and Play (
●
Stateful Packet Inspection (
●
Reset the software to default settings. See "Resetting the Software to Default Settings (Through the
Browser Interface)" on page 116.
104
Configuring the Router
button.
button.
.
UPnP
). See "UPnP (Universal Plug and Play)" on page 105.
). See "SPI (Stateful Packet Inspection)" on page 105.
SPI
Advertisement
Table of Contents
