Table of Contents
Advertisement
Turning Your Device Off
●
From the home page:
1.
Ensure you're logged in to the home page.
2.
Click the
Power Off
●
From the Mini Window:
1.
Ensure you're logged in to the home page.
2.
Click the
Power Off
●
From the device:
Press and hold the power button
Note:
You can turn the device on only from the device itself.
Using the Power Button to Determine the Device State
The power button
this indicates the power state of the device, as shown in the following table.
Power button
Lit, flashing (approximately
every 4 seconds)
Lit, flashing (approximately
every 30 seconds)
18
Power Button
button (below the Virtual Device).
button.
on the device also acts as an LED/status indicator, and may or may not be lit;
Description
●
The device is turned off, and may
or may not be charging.
Not lit
●
The device is turned on, but you
have turned off the LED.
The device is turned on, and the LED
is enabled.
The device is in standby (low power)
mode.
The following are off: LCD, Wi-Fi
radio, 3G/4G radios.
For more information, see "Standby
(Low Power) Mode" on page 43.
for 2 seconds.
Your action
●
To turn the device on, press and
hold the power button
seconds.
●
Optionally, turn on the LED. See
"Enabling and Disabling the LED"
on page 77.
No action required.
To exit standby mode:
Connect the Overdrive 3G/4G
Mobile Hotspot to the AC
charger or computer, through
the USB to Micro B cable.
— or —
Press the power button
for two
.
Advertisement
Table of Contents
