Power Button - Sierra Wireless Overdrive Pro User Manual

Charging Through Your Computer
Notes: If you'll be using USB for data transfer (and not just for charging the device), you must install the
device driver. (See "Making a Tethered Connection" on page 29.)
If you're using Mac OS X 10.4.x, after you connect the device you may see a warning message that
your computer is running on UPS backup battery and that you should perform a computer
shutdown. You can continue with your work. To prevent this message from being displayed, install
the device driver. (See "Making a Tethered Connection" on page 29.)
1.
Make sure your computer is turned on.
2.
Insert the larger end of the micro-USB cable into your computer.
3.
Insert the other end of the cable into the micro-USB port on the side of your device.
When charging, the LCD shows
When the device is charged, the LCD shows

Power Button

Turning Your Device On and Off
Turning Your Device On
1.
Make sure that:
The device has a charged battery inserted.
— or —
The device is connected to the AC charger or a computer (through the micro-USB cable),
as explained above.
.
.
Your Device 13