5)
The domain name is added at the
beginning of your DVR's address, for
example the domain "home" will
appear as home.provision‐isr‐dns.com.
(b) Setting up your DVR to work with the DDNS
server
1)
The DDNS server will work only if the
three steps are completed; (1) domain registration, (2) correct network configuration with
correct preferred/alternate DNS servers, and (3) correct port forwarding configurations are
set on the local network (your router).
2)
On the DVR Under Main menu => Settings => "Config" => "Network" set the correct DNS
servers;
For example take a look at the correct settings on the figure below; the router's IP address is
10.0.0.138, the e‐mail account registered is bob@gmail.com, and the host domain registered is
"home.provision‐isr‐dns.com".
3)
As shown on figure above: Check the "DDNS" check box, select "mintdns" for DDNS type,
and fill in all the other fields.
4)
Make sure you have the preferred & alternate DNS servers filled in (under the "Network"
settings section): the preferred server should be the Internet gateway and the alternate
server should be a different DNS server– for example one of Google's DNS servers (IP
8.8.8.8 or 8.8.4.4)
5)
Click the "Test" button
a.
If the test succeeds click the "Apply" button
b.
If the test fails check all fields again or call the support helpline
6)
Now you can access the DVR using the DDNS (http://home.provision‐isr‐dns.com)
5.7 User Management Configuration
This tab allows you to add normal or advanced users. To add user and set up user authority:
①
Go to Main MenuSetupUsers. Refer to Fig 4‐29.
AHD DVR User Manual
33
Need help?
Do you have a question about the IPSeries and is the answer not in the manual?