Parameter
720P: 1‐15(NTSC)/1‐12(PAL); 960H: 1‐30(NTSC)/1‐25(PAL).
Rate
Resolution
This series supports 720P, 960H.
The higher the value is, the clearer the recorded image is. Six options:
Quality
lowest, lower, low, medium, higher and highest.
Encode
VBR and CBR.
Max bit stream
You shall adjust it subject to the actual network condition.
5.3.3 Time
①
Go to Main MenuSetupRecordTime interface to set recording time. Refer to Fig 4‐
13.
②
Set Pre‐alarm record time and post‐alarm record time. Select "All" to set the same settings
for all channels.
Pre‐alarm Record Time: Set the time in seconds to pre‐record before the actual recording
begins.
Post‐alarm Record Time: Set the time in seconds to post‐record after the actual recording
has finished, five options: 10s, 15s, 20s, 30s, 60s, 120s, 180s and 300s.
Expire Time: Set the expiration time for recorded video. If the set date is overdue, the
recorded files will be deleted automatically.
③
Click "Apply" to save the setting.
5.3.4 Stamp
This provides an option to enable or disable the Camera Name and the Time stamp on the video.
The user can also choose a position for the stamp on the screen.
To set up stamp as follows:
①
Go to Main MenuSetupRecordStamp interface. Refer to Fig 4‐14.
AHD DVR User Manual
Meaning
Fig 4‐13 Record Configuration‐Time
20
Need help?
Do you have a question about the IPSeries and is the answer not in the manual?