Safety Tips - FP ultimail Operator's Manual

8
ultimail Operator Manual
1

Safety tips

The ultimail is a digital franking system with an inkjet printer for franking letter mail.
The ultimail complies with the pertinent safety regulations for office information
equipment.
Please observe the following tips for your own safety:
• Installation and commissioning of the franking system ultimail are only done by
qualified personnel authorised by Francotyp-Postalia.
• Only operate the ultimail system on a grounded single-phase power socket. Make
sure your office power supply conforms to the power requirements shown on the
serial number plates.
• Use only cables provided or approved by Francotyp-Postalia. Make sure that
cables are not damaged.
• Make sure the socket for connecting the ultimail is close by and easily accessible
at all times.
• Do not reach into the danger areas marked with a safety sign.
Keep long hair, fingers, loose clothing pieces, shawls and jewellery away from
moving machine parts.
• Do not remove any part of the safety and protective equipment. Do not make them
inoperative. Do not remove any parts of the housing.
• Never cover the ventilation slots in the housing.
• Pull out the power plug in the event of danger! Call the after-sales service.
• Make sure that no liquids or foreign objects penetrate the interior of the ultimail.
If this happens, pull out the power plug immediately. Have the ultimail franking
system checked by Francotyp-Postalia service before starting it up again.
• The 'Sealer ultimail' is intended for use with the ultimail 60 franking machine.
It is not possible to operate the sealer without the ultimail franking machine.
• The 'Feeder ultimail' is intended for use with the ultimail 60 / ultimail 90 franking
machine. It is not possible to operate the feeder without the ultimail franking
machine.