Ultimail Operating Basics; Access Control By Master / User Card - FP ultimail Operator's Manual

4

ultimail operating basics

In this chapter you will learn about the basic ultimail functions and how to use the
operating menu.
4.1

Access control by MASTER / USER card

MASTER card and USER card, both designated as access cards, control access
rights to the ultimail.
A MASTER card allows you to access all functions.
A USER card allows you to access selected functions only.
– Franking to the assigned account.
– Entering and changing of SMS texts.
– Assigning a logo and SMS text to the account.
The authorisation for franking can be set so that no access card is necessary.
Then franking will be possible without MASTER card or USER card to all
accounts (refer to chapter 10.4 on page 78).
You will find an overview of the access rights on page 192.
How to insert the access card into the
card reader
• Insert access card into the card reader
in the direction of the arrow. The chip
on the card should face downward.
• Push access card in as far as it goes.
You will feel the card snap in.
How to remove the access card
• Simply pull access card out of the card
reader.
ultimail operating basics
15