158
ultimail Operator Manual
14.9
Cleaning / changing the moistening brush
(feeder / sealer ultimail)
Feeder and sealer are supplied with the same moistening unit. Cleaning / changing
the brush is done the same way.
OFF
Power switch
(back of the
machine)
Sword
Brush
• Switching off the franking system:
Switch the power switch on the back of
the franking machine to the
• Separate the feeder / sealer from the
franking machine. This facilitates
changing the moistening brush and
prevents you from injury due to lacking
elbow-room.
For details on separating the feeder /
sealer from the franking system, read
pages 184 to 187.
• Release roller transport by pressing on
release key.
Roller transport moves upward.
Now you have access to the moistening
brush beneath the roller support.
On both sides, the brush is provided with
pins that are snapped in clips on the
sword.
• Slightly lift the brush and pull it off the
sword in the direction of the arrow.
O
position.
Need help?
Do you have a question about the ultimail and is the answer not in the manual?