Switch On / Off Seal Function (Ultimail With Feeder / Sealer Only) - FP ultimail Operator's Manual

6.1.4 Switch on / off seal function
Extension bracket
For large envelopes:
• Position the extension bracket.
• Position a sample letter.
• Hold the bar in the grip recess and slide
the letter guide so that it fits the letter
format. The sample letter should have
enough clearance between letter guide
face and adjustable letter guide (about
2 to 3 mm).
(ultimail with feeder / sealer only)
Seal
If the letters are to be sealed:
• Place the switch to the rear into
seal position.
• Check filling level in water tank.
• Fill the water tank if required. Read
chapter 14.6 on page 151.
Please note:
Permanently reliable sealing results can
be assured only when you use 'sealit'
sealing liquide.
Only use envelopes that are suited for
sealing by machinery. For details to
envelope specifications, read page 200.
Non seal
If you do not want to seal letters or if they
are already sealed:
• Place the switch to the front into
non seal position.
41
Franking