FP ultimail Operator's Manual page 191

Commissioning and function test
ON
Power switch
(back of the
machine)
Appendix – Moving the ultimail to another location
• Fill water tank. Read chapter 14.6 on
page 151.
• Switching on the ultimail franking sys-
tem: Switch the power switch on the
back of the franking machine to the
I
position.
• Wait until the display shows the home
menu. The ultimail is ready for opera-
tion.
We recommend the following short
function test:
• Do a trial run. For instructions on the
trial run, read chapter 4.3 on page 19.
• Adjust the ink cartridges if the franking
imprint has shifted position. Read
chapter 14.3 on page 144.
• Clean the print system if necessary
(e.g. gaps in the print image). Read
chapter 14.4 on page 145.
191