Attach Adjustable Letter Guide To Feeder / Sealer - FP ultimail Operator's Manual

Franking system
Hide thumbs Also See for ultimail:
Table of Contents

Advertisement

174
ultimail Operator Manual
15.4

Attach adjustable letter guide to feeder / sealer

Wire
spring
Pin
The adjustable letter guide is provided
Clips
with clips for locking the bar. The two
slots in the front edge of the plastic will
hold the wire spring on the bar.
Slots
How to insert the letter guide:
• Pull out the bar for adjusting the letter
guide.
• Insert the letter guide so that the wire
spring (in the bar) engages into the two
narrow slots on the front edge of the
plastic.
• Tilt the letter guide downward (in the
direction of the letter receiving tray).
Place the two clips on the pins at the
bar with slight pressure and lock into
place.
• Insert the bar.
You can avoid the letter guide being
pulled off:
– For adjusting the letter guide, always
hold in the recessed grip at the bar.
– Always set the letter guide so that a
clearance of about 2 to 3 mm is left.

Hide quick links:

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the ultimail and is the answer not in the manual?

Related Products for FP ultimail

Table of Contents