FP ultimail Operator's Manual page 21

Letter guide face
Gaps
Misalignment
• Place an empty envelope on the letter
receiving tray
– side to be printed face up
– the upper edge flush to the letter
guide face.
• Push the envelope in until the letter
sensor recognises the envelope and
starts letter transport.
The ultimail feeds the envelope, prints,
and places the printed envelope in the
catch tray.
Position, in the same way, an empty
envelope for trial run at the sealer or at
the feeder. For details on how to use
sealer and feeder, read chapter 6.
Check print quality
Make sure your ultimail prints flawless
franking imprints without misalignments.
• Examine the imprint. It must not contain
any gaps or misalignments.
This illustration shows a flawless imprint.
If the imprint exhibits misalignment:
• Adjust the ink cartridges
(see chapter 14.3).
If the imprint contains gaps or blurs:
• Clean the ink cartridges
(see chapter 14.4).
ultimail operating basics
21