New Pc Protocol - FP ultimail Operator's Manual

130
ultimail Operator Manual
13.19

New PC Protocol

This setting configures which parameters the ultimail sends to the personal computer
(PC), e.g. at using the postage accounting software KARAT. The factory-setting "New
PC Protocol: ON" makes data transmission work smoothly in most cases.
You need to change this setting only if problems occur in the communication of the
ultimail with PC-software.
SET UP
SYSTEM SETTINGS
MORE
MORE
MORE
MORE
MORE
• Go to the SET UP menu using the
key.
• Select SYSTEM SETTINGS
MORE MORE
MORE.
• Press the key next to NEW PC PRO-
TOCOL. The setting switches between
ON and OFF.
The displayed setting is activated and
maintained until the next change, even if
you switch the ultimail off.
MORE MORE