Cleaning / Changing The Moistening Sponge (Feeder / Sealer Ultimail) - FP ultimail Operator's Manual

154
ultimail Operator Manual
14.8 Cleaning / changing the moistening sponge
(feeder / sealer ultimail)
Feeder and sealer are supplied with the same moistening unit. Cleaning / changing
the sponge is done in the same way.
Warning! Please observe the following safety tips for cleaning and changing
the sponge on the feeder and sealer:
• Be extremely careful when handling liquids. Immediately pull out the
power plug if any liquid has penetrated the interior of the ultimail. Have the
ultimail franking system checked by Francotyp-Postalia service before
starting it up again.
• It is advisable to switch off the franking machine before removing the water
tank and changing the sponge.
OFF
Power switch
(back of the
machine)
• Switch off the franking system:
Switch the power switch on the back of
the franking machine to the
• Release the flap by pressing on the
recess, and fold up as far as it goes.
O
position.