Working With The Batch Counter - FP ultimail Operator's Manual

52
ultimail Operator Manual
7.2

Working with the batch counter

You can use the batch counter function to frank a preset number of letters.
This function is especially useful for stack processing with feeder:
– The ultimail will stop once the total number of letters is finished.
– You can start again with key and frank the next stack.
SET UP
MODE SETTING
PRE-SELECT COUNTER
Switching DX mode off
• In home menu, press the
about 3 seconds.
The ultimail goes back to the 'normal'
METERING (franking) mode.
• Go to the SET UP menu using the
key.
• Select MODE SETTING
SELECT COUNTER.
A pop-up prompts you to enter the
desired amount.
• Type the desired number.
• Confirm with the
key for
PRE-
key.