Switching The Ultimail On / Off - FP ultimail Operator's Manual

3

Switching the ultimail ON / OFF

ON
Power switch
(back of the
machine)
Home menu (example)
Switching the ultimail ON / OFF
Use the power switch on the back of the
franking machine to switch the ultimail
franking system ON / OFF.
Switching on
• Switch the power switch on the back of
the franking machine to the
The display lights up and a start routine is
initiated. All system components are now
checked and activated by the ultimail.
The self-test is accompanied by signal-
ling beeps and information on display.
The home menu appears in the display.
The ultimail is ready for operation.
Notes:
The example shows the complete home
menu.
ACCOUNT only appears if an access
card (MASTER or USER) is plugged in or
if access control is switched off.
A postage value only appears if
– all required mailing data are selected,
– the displayed weight value exceeds 0 g
and
– an access card (MASTER or USER) is
plugged in or if access control is
switched off.
METERING stands for franking mode.
13
I
position.