Setting Memory 1 As Standard After Standby - FP ultimail Operator's Manual

108
ultimail Operator Manual
13.10

Setting Memory 1 as standard after standby

You can set the ultimail to switch automatically to standard mode (METERING...)
after waking up from standby-mode, and then the product settings saved as
Memory 1 will be used.
This function will only take effect, if the home menu is displayed when standby-mode
is activated.
SET UP
SYSTEM SETTINGS
MORE
MORE
MORE
MORE
MORE
• Go to the SET UP menu using the
key.
• Select SYSTEM SETTINGS
MORE MORE
MORE.
• Press the key next to MEMO1 AFTER
STANDBY. The setting switches
between OFF and ON.
The displayed setting is activated and
maintained until the next change, even if
you switch the ultimail off.
MORE MORE