Filling The Water Tank (Feeder / Sealer Ultimail) - FP ultimail Operator's Manual

14.6 Filling the water tank
Feeder and sealer are supplied with the same moistening unit. Filling the water tank
is done in the same way.
Please note that we can assure reliable sealing results only when you use Francotyp-
Postalia 'sealit' sealing liquid.
Using tap water is possible. Note, however, that the sealing process may be less
reliable when using water.
Warning! Please observe the following safety tips when handling the water
tank:
• Make sure that the screw cover on the water tank is firmly tightened and
well sealing before inserting the tank into the machine with its opening
down.
• Be extremely careful when handling liquids. Immediately pull out the
power plug if any liquid has penetrated the interior of the ultimail. Have the
ultimail franking system checked by Francotyp-Postalia service before
starting it up again.
(feeder / sealer ultimail)
• Release the flap by pressing on the
recess, and fold up as far as it goes.
Recess
• Remove water tank out of housing.
Maintenance and care
151