Internal Batch Takeup (Roll-To-Roll) - Intermec EasyCoder PX4i User Manual

Chapter 4 — Media Load

Internal Batch Takeup (Roll-to-roll)

The EasyCoder PX4i can print on labels, tickets, tags, and continuous
stock in various forms. This chapter describes the case when printed
labels fi tted on liner (backing paper) or pre-perforated tickets and tags
are wound up inside the printer. The roll of printed labels, tickets, or tags
can then be removed and be handled manually. This requires an optional
internal liner/batch takeup unit.
The takeup hub can accommodate 30 to 40% of a full-size media roll.
Use the <Feed> key (see fi gure #16) when loading the same type of media
as before. When switching to a new type of media, or if the printer does
not feed out the media properly, simultaneously press the <Shift> and
<Feed> keys to perform a "testfeed."
Internal batch takeup can be used for:
• Self-adhesive labels fi tted on liner
• Pre-perforated tickets with gaps
• Pre-perforated tickets with marks
34 EasyCoder PX4i User's Guide (Fingerprint version)