Reading The Current Setup - Intermec EasyCoder PX4i User Manual

Chapter 6 — Setting Up the Printer

Reading the Current Setup

The printer's current setup values can be read from the printer's display
window by browsing through the Setup Mode.
You can list the printer's current setup values by printing test label "Setup
Info" in the Setup Mode or by using Intermec Shell.
The current setup values can be sent to the host via the standard serial
communication channel using a SETUP WRITE "uart1:" state-
ment (see Intermec Fingerprint v8.3x, Programmer's Reference Manual).
52 EasyCoder PX4i User's Guide (Fingerprint version)