Tickets With Gap - Intermec EasyCoder PX4i User Manual

Tickets with Gaps
⇐ a ⇒ Media Width
Maximum:
Minimum:
⇐ b ⇒ Copy Length
Maximum:
8 dots/mm (203.2 dpi):
11.81 dots/mm (300 dpi): 4,162 mm (163 inches)
provided there is a suffi cient amount of free SDRAM memory
Minimum (without LTS):
Minimum (with LTS)
⇐ c ⇒ LSS Detection Position
Variable, see Chapter 12.
⇐ d ⇒ Detection Slit Length
The length of the detection slit (excluding corner radii) must be mini-
mum 2.5 mm (0.10 inches) on either side of the LSS detection position
(e).
⇐ e ⇒ Detection Slit Height
Maximum:
Recommended:
Minimum:
Opacity
Max opacity difference:
Media Type Setup
• Ticket (w gaps)
Note: Do not allow any perforation to break the edge of the
media as this may cause the media to split and jam the printer.
EasyCoder PX4i User's Guide (Fingerprint version)
Appendix B — Media Specifi cations
120 mm (4.72 inches)
25 mm (1.00 inches)
6,143 mm (241 inches)
8.0 mm (0.32 inches)
12.0 mm (0.47 inches)
25.0 mm (0.98 inches)
1.6 mm (0.06 inches)
1.27 mm (0.05 inches)
48%
131