Table of Contents
Advertisement
Lamp Replacement
If the filter is blocked by dust, the effect of cooling fan will be reduced, and
heat accumulate in the projector, service life will be shortened and the life of
the lamp. Cleaning filter is suggested after lamp replacement. Replacement
Refer to "Clean the filter".
Lamp Counter Reset
This function resets the counter of Lamp usage
hours.Please be sure to reset the lamp counter
after replacing the lamp. WARNING indicator
turns Off and the lamp replacement icon disap-
pears after reset the lamp counter.
Press < MENU > button on the remote con- troller
or on the top control panel to display the OSD
menu. Press button to select the
Expand menu, then press <OK> or button.
1) Press
button to select [Lamp counter]
menu.
2) Press <OK > button.
3)Press
button to select [Lamp counter
reset], then press <OK> button.
4)" Lamp replacement counter reset ? "
conformation box appear.
4) Select "Yes" and Press <OK> button.
Lamp counter
Expend
Language
Auto setup
Keystone
Logo
Security
Power management
Filter counter
Test pattern
Network
Factory default
Lamp counter
13
Advertisement
Table of Contents
