No Show Function; Freeze Picture Function; Auto Image Function; Normal Picture Function - Eiki LC-X984 Owner's Instruction Manual

NO SHOW FUNCTION

Press the NO SHOW button on the remote control unit. The screen will change
into black image and the "NO SHOW" is displayed on the screen for a few
seconds. This function is cancelled when the NO SHOW button is pressed again
or any other function button is pressed.

FREEZE PICTURE FUNCTION

Press the FREEZE button on the remote control unit to freeze the picture on screen. This function is cancelled when
the FREEZE button is pressed again or any other button is pressed.
NOTE: Your computer or video equipment is not affected by this function, and will continue to run.

AUTO IMAGE FUNCTION

Press the AUTO IMAGE button on the remote control unit or on the projector. The item(s) indicated "ON" in the AUTO
IMAGE FUNCTION are adjusted automatically.
If all the items in AUTO IMAGE FUNCTION are "OFF", AUTO IMAGE SETTING display appears. If you wish to
operate the AUTO IMAGE FUNCTION, perform the steps 3 9 of "AUTO IMAGE FUNCTION" section on page 38.
-

NORMAL PICTURE FUNCTION

The normal picture image level is factory preset on the projector and can be
restored anytime by pressing the NORMAL button on the remote control unit or on
the projector. The "Normal" display will be displayed on the screen for a few
seconds.

P-TIMER FUNCTION

Press the P-TIMER button on the remote control unit. The timer display "00:00" appears
on the screen and the timer starts to count the time (00:00 to 59:59). Press again the P-
TIMER button to stop the timer. Then press the P-TIMER button to cancel the P-TIMER
function.
29