Calling - Docomo Arrows NX F-06E Instruction Manual

Calling

Making a call
1
From the Home screen,
2
[Dial] Enter a phone number
To correct phone number, tap
Notifying caller ID :
[Notify]/[Not notify]
Your caller ID is important personal information. So,
take care when notifying people of it.
Selecting prefix :
Select a number registered in Prefix setting (prefix) (
P57) beforehand to add before a phone number.
Adding 2-sec pause/wait :
wait] Enter an additional number
You can use [Add 2-sec pause] or [Add wait] to enter
main phone number and additional code at once when
entering the code additionally during a call for bank
balance inquiries, ticket reservation services, etc.
2-sec pause "," : When the phone number is dialed, 2-
second pause will be automatically inserted and then
additional code will be sent.
Wait ";" : When the phone number is dialed, the phone
will wait automatically and a confirmation message
for sending additional code appears. When you tap
[Yes], the additional code is sent.
[Phone]
.
[Caller ID notification]
[Select prefix] Select a prefix
[Add 2-sec pause]/[Add
3
4
When a call is ended, [End]
✔INFORMATION
If your face etc. comes close to the proximity sensor during a
call, the display goes out. It is redisplayed by moving away
from the sensor.
When the earphone is connected or while calling with the
speakerphone, the proximity sensor stops and the display
remains on even when the face, etc. comes close to the
sensor.
If you put the ear to the earpiece over the hair, etc. the
proximity sensor does not work normally and the call may be
interrupted.
You can set to show/hide caller ID all at once in "Caller ID
notification". P57
For details on sending touch-tone signals during a call, see
"Operation during a call".
53
P55
Calling