Docomo Arrows NX F-06E Instruction Manual page 29

d Check that the back side of the terminal is facing up, then
insert the tray straight into the docomo mini UIM card slot
Corner cut
Tray
IC
Tab
Slot cap
e Close the slot cap of the terminal P21
Removing
a Open the slot cap with back side of the terminal facing up,
put your fingertip on the tab of the tray, then pull it out
straight to remove the docomo mini UIM card.
b Close the slot cap of the terminal P21
✔INFORMATION
When handling docomo mini UIM card, take care not to touch
or scratch the metal part. Note that inserting docomo mini
UIM card forcibly into the terminal may damage docomo
mini UIM card.
For removing/inserting the tray from/into the docomo mini
UIM card slot, do not remove or insert forcibly. Doing so may
damage the tray.
IMEI plate with IMEI number and bar code printed is inserted
between microSD card slot and docomo mini UIM card slot.
Do not pull out the IMEI plate because it will be requested at
a DOCOMO-specified repair office when the terminal is
damaged etc. Please note the followings.
- If you pull out the IMEI plate accidentally, insert it.
- Do not pull out the IMEI plate forcibly because it may cause
damage.
- If you lost the IMEI plate, repairs may be refused.
Security code for docomo mini UIM
card
Security code called as PIN code can be set in the docomo mini
UIM card. The code is set to "0000" at the time of subscription,
but you can change the number by yourself. P134
27
Before using the terminal