Docomo Arrows NX F-06E Instruction Manual page 157

Connecting with registered Bluetooth
devices
Connect Bluetooth device. You can talk or play back sounds or
music using a Bluetooth device, or exchange data to or from a
Bluetooth device. And you can enter characters on the
terminal with Bluetooth compatible keyboard.
Set a Bluetooth device to connection stand-by mode in
advance.
When connected, appears on the status bar.
1
From the Home screen,
2
[Bluetooth]
If Bluetooth devices do not appear, tap [Not visible to
other Bluetooth devices]/[Only visible to paired devices]
to switch to [Visible to all nearby Bluetooth devices],
then tap [SEARCH FOR DEVICES].
3
Tap a detected Bluetooth device Enter a
passcode (PIN) as required and [OK]/[Pair]
When connection is requested from another
Bluetooth device
If a Bluetooth pair setting request screen appears, enter a pass
code (PIN) if necessary and tap [OK], or tap [Pair].
✔INFORMATION
A message notifying that communication charges may
become high appears when connecting with DUN (Dial-Up
Network Profile).
You can send data such as Gallery ( P99) and contacts or
receive data from a Bluetooth device.
<Example> Sending files in Gallery
1
2
[Settings]
3
<Example> Receiving files from a Blutooth device
1
2
155
Sending or receiving data to or from
Bluetooth device
Set a Bluetooth device to connection stand-by mode in
advance.
Open Gallery and touch and hold an image
[See all] [Bluetooth]/
Tap a Bluetooth device
Open the Notification panel to check if transmission is
completed.
Send files from a Bluetooth device
After file arrival is notified, open the
Notification panel
Incoming file] [Accept]
To check received files, from the Home screen,
[Settings] [Bluetooth]
[Bluetooth share:
[Show received files].
Data communication