Turning Power On/Off - Docomo Arrows NX F-06E Instruction Manual

Charging with a PC
If you connect the terminal with a PC using a PC connection
USB cable T01 (optional), you can charge the terminal with a
PC.
When a screen of new hardware detection or operation
selection appears on the PC, select "

Turning power ON/OFF

Turning power ON
Press and hold P (2 sec. or more) until the
1
indicator LED lights in green
The terminal vibrates and the lock screen appears
following the startup screen.
2
On the lock screen,
Lock screen P44
Depending on selected lock option ( P134),
authenticate on the lock screen.
Turning power ON for the first time
After setting up Google account ( P147) and Setting my body
(My physical profile) ( P144), make initial setting of docomo
service. Follow the onscreen instructions.
When a confirmation screen for sending terminal error
information appears, tap [OK].
When a software update confirmation screen appears, tap
[OK].
When the instruction guide appears, tap [Do not show this
again] or [OK].
Turning power OFF
Press and hold P until the phone options menu
1
appears
2
[Power off] [OK]
(Cancel)".
The terminal turns off vibrating.
Press and hold P for 10 seconds or more to shut down
the power forcibly.
Basic operation
Using touch panel
There are 2 types of operations: an operation by touching the
touch panel directly with your finger (touch operation) and
operation without touching (hovering function).
Hovering function P33
Set whether to vibrate when tapping is recognized (Distinct
touch
31
P124).
Before using the terminal